Do you have a DJI drone that you want to unbind from its controller? Unbinding a drone is a simple process that allows you to disconnect it from a specific remote controller. This can be useful if you want to use a different controller or if you’re selling or gifting your drone to someone else. In this guide, we’ll walk you through the steps to unbind your DJI drone.
Step 1: Power On Your Drone
Start by powering on your DJI drone and ensuring that it’s connected to its remote controller. Make sure both the drone and the controller have enough battery power to complete the unbinding process. Keep in mind that the exact steps may vary depending on the model of your drone, so it’s always a good idea to consult the user manual for specific instructions.
Step 2: Access the Settings Menu
Once your drone is powered on and connected to the remote controller, access the settings menu on the controller’s screen. This can usually be done by tapping on the gear icon or a similar settings symbol. Look for an option related to binding or connecting devices.
Step 3: Unbind the Drone
In the settings menu, you should see an option to unbind or disconnect your drone. Tap on this option to begin the unbinding process. Follow any additional prompts or confirmations that may appear on the screen. Keep in mind that unbinding your drone will disconnect it from the current controller and prevent it from being operated until it’s bound to another controller.
Remember to always exercise caution and follow the manufacturer’s instructions when unbinding your DJI drone. If you’re unsure about any of the steps, refer to the user manual or contact DJI customer support for assistance.
By following these simple steps, you can easily unbind your DJI drone from its current controller. Once the unbinding process is complete, you’ll be able to use a different controller or transfer ownership of the drone without any issues. Remember to always practice safe and responsible drone operation, and happy flying!
How to Unbind DJI Drone
If you need to unbind your DJI drone from its controller or from the DJI Go app, follow these steps:
1. Unbinding from the Controller
To unbind the drone from its controller, follow these steps:
| Step | Action |
| 1 | Make sure both the drone and the controller are turned off. |
| 2 | Turn on the controller and quickly press and hold the unbind button (refer to your controller’s user manual for the exact location of the unbind button). |
| 3 | While still holding the unbind button, turn on the drone. |
| 4 | Wait for the controller and drone to establish a connection. Once connected, release the unbind button. |
2. Unbinding from the DJI Go app
To unbind the drone from the DJI Go app, follow these steps:
| Step | Action |
| 1 | Open the DJI Go app on your mobile device. |
| 2 | Tap on the drone icon to enter the camera view. |
| 3 | Tap on the three dots icon in the top right corner of the screen to open the settings. |
| 4 | Scroll down and tap on “Unbind Aircraft”. |
| 5 | Confirm the unbinding process by tapping on “Yes” when prompted. |
By following these steps, you can successfully unbind your DJI drone from its controller or from the DJI Go app.
Disconnecting DJI Drone from Remote Controller
If you’re looking to unbind or disconnect your DJI drone from its remote controller, follow the steps below:
Step 1: Prepare for Disconnecting
Make sure both the drone and remote controller are powered off. This will help avoid potential damage to the devices or interference during the unbinding process.
Step 2: Access the DJI App
Turn on your remote controller and launch the DJI app on your mobile device. Connect your mobile device to the remote controller using the appropriate cable or wireless connection.
Step 3: Navigate to the Settings
Once you’re in the DJI app, navigate to the settings menu. This can usually be accessed by tapping on the gear icon or a similar symbol located on the app’s interface.
Step 4: Find the “Unbind” or “Disconnect” Option
Within the settings menu, look for an option that allows you to unbind or disconnect the drone from the remote controller. The exact location and wording may vary depending on the DJI app version or drone model you have.
Note: Some DJI drones may require you to go through additional steps or enter a specific code to confirm the unbinding process.
Step 5: Confirm and Unbind
Once you’ve located the unbind or disconnect option, follow the on-screen prompts to confirm your choice. This will initiate the unbinding process between the drone and remote controller.
Note: Be cautious while unbinding your drone, as it will no longer be under the direct control of the remote controller once the process is complete.
Step 6: Power off the Devices
After the unbinding process is finished, power off both the drone and remote controller. This will ensure a clean disconnection and help prevent any accidental actions.
By following these steps, you should be able to successfully unbind or disconnect your DJI drone from its remote controller.
Removing DJI Drone from DJI Go App
The DJI Go app is a powerful tool for controlling and managing your DJI drone. However, there may be instances where you need to unbind your drone from the app. Here’s how you can do that:
Step 1: Open DJI Go App
Launch the DJI Go app on your mobile device.
Step 2: Connect to Your Drone
Make sure your drone is powered on and nearby. Connect your mobile device to the drone’s Wi-Fi network. Once connected, the app will automatically recognize and connect to your drone.
Step 3: Go to the Drone Settings
Tap on the three horizontal lines in the top-left corner of the app to open the main menu. From the menu, select “Settings” to access the drone settings.
Step 4: Unbind the Drone
In the drone settings, scroll down and look for the “Unbind” or “Remove” option. Tap on it to start the unbinding process.
Note: Unbinding your drone will delete all flight records and settings associated with the drone from the DJI Go app.
Confirm the unbinding action when prompted. Once confirmed, the drone will be disconnected and unbound from the DJI Go app.
Your DJI drone is now successfully removed from the DJI Go app.
Resetting DJI Drone to Factory Settings
If you need to unbind and reset your DJI drone to its factory settings, follow these steps:
Step 1: Update Firmware
Before resetting your DJI drone, make sure that you have the latest firmware installed. Connect your drone to the DJI app and check for any available updates. Install them if necessary.
Step 2: Unbind the Drone
To unbind your DJI drone, go to the DJI app settings and look for the “Unbind” or “Reset” option. Follow the on-screen instructions to complete the unbinding process.
Note: Unbinding your drone will remove all the linked devices and settings associated with it.
Step 3: Reset to Factory Settings
Once the unbinding process is complete, you can reset your DJI drone to its factory settings. Again, go to the DJI app settings and look for the “Reset” or “Factory Reset” option. Confirm your selection and wait for the reset process to finish.
Note: Resetting your drone will erase all the customized settings, flight logs, and other data from the device.
Step 4: Rebind the Drone
After the reset is complete, you can rebind your DJI drone to your mobile device or controller by following the pairing process outlined in the DJI app.
Note: It is essential to rebind your drone to regain control and access its features.
By following these steps, you can successfully unbind and reset your DJI drone to its factory settings.
Unpairing DJI Drone from Mobile Device
If you want to unbind your DJI drone from your mobile device, follow the steps below:
| Step | Description |
|---|---|
| 1 | Open the DJI app on your mobile device. |
| 2 | Tap on the “Settings” option, usually represented by a gear icon. |
| 3 | Look for the “My Aircraft” or “Device” section in the settings menu. |
| 4 | Select your DJI drone from the list of connected devices. |
| 5 | Tap on the “Unbind” or “Disconnect” option to unpair the drone from your mobile device. |
| 6 | Follow the on-screen instructions to confirm and complete the unpairing process. |
Once you have successfully unbound your DJI drone from your mobile device, you will no longer be able to control the drone using the app. If you want to pair it with another mobile device, simply follow the steps for connecting a new device to your DJI drone.
Deleting DJI Drone from DJI Assistant 2
If you want to unbind your DJI drone from DJI Assistant 2, follow the steps below:
Step 1: Connect your drone to the computer
Using a USB cable, connect your DJI drone to your computer. Make sure the drone is powered on.
Step 2: Launch DJI Assistant 2
Open DJI Assistant 2 on your computer. If you don’t have it installed, you can download it from the DJI website and install it.
Step 3: Sign in and select your drone
Log in to your DJI account within DJI Assistant 2. Once logged in, select your drone model from the available options.
Step 4: Go to Device Management
In DJI Assistant 2, click on “Device Management” in the top menu to access the device management interface.
Step 5: Unbind the drone
In the device management interface, locate your drone and click on the “Unbind” button next to it. Confirm the unbinding process when prompted.
Step 6: Disconnect and power off the drone
Once the unbinding process is complete, disconnect the drone from your computer and power it off.
By following these steps, you can successfully unbind your DJI drone from DJI Assistant 2. Remember to always exercise caution when performing any actions that may affect your drone’s settings.
| Step | Description |
|---|---|
| Step 1 | Connect your drone to the computer using a USB cable. |
| Step 2 | Launch DJI Assistant 2 on your computer. |
| Step 3 | Sign in to your DJI account and select your drone model. |
| Step 4 | Go to Device Management in DJI Assistant 2. |
| Step 5 | Unbind the drone by clicking the “Unbind” button. |
| Step 6 | Disconnect and power off the drone. |
Releasing DJI Drone from DJI Flight Hub
If you want to unbind your DJI drone from the DJI Flight Hub, follow these simple steps:
1. Log in to your DJI Flight Hub account using your credentials.
2. Once logged in, go to the “Devices” section of the Flight Hub.
3. Find the drone that you want to unbind and click on its name to open the device information page.
4. On the device information page, look for the “Unbind” button and click on it.
5. A confirmation message will appear asking if you really want to unbind the drone. Click “OK” to proceed.
6. After confirming, the drone will be released from the DJI Flight Hub and no longer be connected to your account.
By following these steps, you can easily unbind your DJI drone from the DJI Flight Hub and free it for use with other accounts or applications.
Detaching DJI Drone from DJI FPV Goggles
When you have finished using your DJI drone with the DJI FPV Goggles, it is important to properly detach the drone to ensure safe and secure storage. Follow these steps to unbind your DJI drone from the DJI FPV Goggles:
- Ensure that the DJI drone is powered off and the DJI FPV Goggles are not connected.
- Locate the bind button on the drone. This button is usually located on the side or bottom of the drone.
- Press and hold the bind button on the drone. While holding the bind button, power on the drone.
- Continue holding the bind button until the LED lights on the drone start flashing rapidly.
- On the DJI FPV Goggles, navigate to the binding settings. This can usually be found in the menu under the drone settings.
- Select the option to unbind the drone from the DJI FPV Goggles.
- Follow the prompts on the DJI FPV Goggles to complete the unbinding process.
- Once the unbinding process is complete, power off the DJI drone and disconnect it from the DJI FPV Goggles.
By following these steps, you can safely detach your DJI drone from the DJI FPV Goggles. This will ensure that your equipment is properly stored and ready for your next flight.
Disabling DJI Drone from DJI Remote Controller Settings
If you want to unbind your DJI drone from the DJI remote controller, you can do so by following these steps:
Step 1: Access Controller Settings
First, power on your DJI drone and make sure it is in range of the remote controller. Then, navigate to the controller settings on the built-in screen or app of the remote controller.
Step 2: Enter Unbinding Mode
Once in the controller settings, find the option for unbinding your drone. This may be labeled as “Unbind” or “Disconnect” in the settings menu. Select this option to enter unbinding mode.
Step 3: Confirm Unbinding
After you enter unbinding mode, the remote controller will search for nearby drones that are bound to it. Once your drone is detected, you will be prompted to confirm the unbinding process. Select “Confirm” or “Yes” to complete the unbinding process.
Note that unbinding your drone from the remote controller will disable the connection between the two devices. You will need to rebind the drone if you want to control it with the same remote controller in the future.
By following these steps, you can easily unbind your DJI drone from the DJI remote controller and disable its connection. This can be useful if you want to use a different remote controller with your drone or if you no longer want to control it with a remote controller.
Question-answer:
Is it possible to unbind a DJI drone without using the DJI Go app?
No, it is not possible to unbind a DJI drone from the remote controller without using the DJI Go app. The app provides the necessary settings and options to unbind the drone and remote controller. Without the app, you won’t be able to access these settings and perform the unbinding process.
