Setting up a Swann NVR security camera to your phone is a simple process that can greatly enhance the security and surveillance of your property. With a few easy steps, you can have access to live feed and recordings from your security cameras right on your smartphone.
Step 1: Install the Swann App
The first thing you need to do is install the Swann app on your smartphone. The app is available for both iOS and Android devices, and can be downloaded for free from the App Store or Google Play Store. Once the app is installed, open it and create a new account if you don’t already have one.
Step 2: Connect the NVR to Your Router
Next, you need to connect your Swann NVR to your home router. This can be done using an Ethernet cable. Plug one end of the cable into the LAN port on the back of the NVR, and the other end into an available LAN port on your router. Make sure both devices are powered on.
Step 3: Configure the NVR Settings
Once the NVR is connected to the router, you need to configure its settings. This can be done by accessing the NVR’s interface through a web browser on your computer. Enter the NVR’s IP address in the address bar of the browser, and log in using the default username and password.
Note: It is recommended to change the default username and password for security purposes.
Step 4: Set Up Remote Viewing
To set up remote viewing on your phone, you need to enable the DDNS (Dynamic DNS) feature on the NVR. This will allow you to access the NVR’s live feed and recordings from anywhere using your phone. Enter a unique domain name for your NVR, and make a note of it.
Step 5: Add the NVR to the Swann App
Finally, open the Swann app on your phone and tap on the “Add Device” option. Select “Scan QR Code” and scan the QR code displayed on the NVR’s interface. Once the NVR is successfully added, you will be able to access its live feed and recordings on your phone.
By following these simple steps, you can easily set up your Swann NVR security camera to your phone, and have peace of mind knowing that you can monitor your property from anywhere, at any time.
Swann NVR Security Camera Setup
If you have purchased a Swann NVR security camera and want to set it up to access the live feed on your phone, here is a step-by-step guide to help you get started.
Step 1: Connect the NVR to your Network
First, make sure your NVR is connected to your router or modem using an Ethernet cable. This will enable the NVR to communicate with your network and allow you to access it remotely.
Step 2: Set up the Cameras
Next, connect your security cameras to the NVR. Ensure that each camera is properly connected to the NVR using the provided cables. You can refer to the user manual for detailed instructions on how to connect the cameras.
Step 3: Install the SwannView Link App
On your smartphone, go to the App Store or Google Play Store, depending on your device, and search for the SwannView Link app. Download and install the app on your phone.
Step 4: Configure the NVR and App
Once the app is installed, open it and tap on the “+” icon to add your NVR. Follow the on-screen instructions to configure the NVR settings. Make sure to enter the correct username and password, which can be found in the NVR’s user manual or on the device itself.
Step 5: Connect to the NVR
After successfully configuring the NVR, you should be able to see the live video feed from your security cameras on your phone. Simply tap on the NVR name in the app to access the live feed and manage the cameras.
- You can view the live feed from a single camera or select multiple cameras to view at once.
- The app also allows you to adjust camera settings, such as motion detection sensitivity and recording preferences.
- You may also be able to receive push notifications on your phone when motion is detected by the cameras.
That’s it! You have successfully set up your Swann NVR security camera to access it on your phone. Now you can monitor your property remotely and have peace of mind knowing that your home is secured.
Easy Steps to set up Swann NVR security camera to phone
Setting up your Swann NVR security camera to your phone is a simple process that can provide you with peace of mind and added security for your home or business. Follow these easy steps to get started:
Step 1: Install the Swann Security App
First, you need to download and install the Swann Security App on your phone. You can find the app in the App Store or Google Play Store. Once downloaded, open the app and sign in or create a new account if you don’t have one already.
Step 2: Connect your NVR to the internet
Make sure your NVR is connected to the internet through an Ethernet cable or Wi-Fi. This will allow the NVR to communicate with your phone and the Swann Security App.
Step 3: Add your NVR to the Swann Security App
On the Swann Security App, tap on the “Add a Device” button. Select “NVR” as your device type and follow the on-screen instructions to add your NVR to the app. Make sure to enter the correct username and password for your NVR.
Step 4: Configure your camera settings
Once your NVR is successfully added to the app, you will be able to see a list of connected cameras. Tap on the camera you want to set up and configure its settings according to your preferences. This may include adjusting the motion detection sensitivity, setting up notifications, or enabling remote access.
Step 5: View your camera feed on your phone
After configuring the camera settings, you can now view the live feed from your NVR security camera on your phone. Simply tap on the camera from the list and you will be able to see the live video stream. You can also take snapshots or record videos directly from the app.
Step 6: Access your camera remotely
If you want to access your camera remotely when you are away from home or the office, you need to enable remote access. To do this, go to the settings menu in the Swann Security App and enable the “Remote Access” option. Make sure your NVR is connected to the internet and you have a stable internet connection on your phone.
That’s it! You have successfully set up your Swann NVR security camera to your phone. Now you can monitor your home or business anytime, anywhere, providing you with added security and peace of mind.
Download and Install Swann Security App
To access your Swann NVR security camera system on your phone, you will need to download and install the Swann Security app. The app is available for both Android and iOS devices. Follow these steps to set it up:
For Android:
- Open the Google Play Store on your Android device.
- Search for “Swann Security” in the search bar.
- Locate the official Swann Security app and tap on it.
- Tap the “Install” button to download and install the app.
- Once the installation is complete, tap “Open” to launch the app.
For iOS:
- Open the App Store on your iOS device.
- Search for “Swann Security” in the search bar.
- Locate the official Swann Security app and tap on it.
- Tap the “Get” button and authenticate with your Apple ID if prompted.
- Once the download is complete, tap “Open” to launch the app.
After downloading and installing the Swann Security app, you will need to set it up to connect to your NVR security camera system. Follow the app’s on-screen instructions to create an account, add your camera system, and configure the necessary settings. Make sure to connect your phone to the same network as your NVR to ensure a smooth setup process.
Once the setup is complete, you will be able to access your Swann NVR security camera system directly from your phone using the Swann Security app. You can view live video feeds, playback recorded footage, receive push notifications for motion events, and control other camera settings all from the convenience of your phone.
Find Swann Security App on App Store or Google Play Store
If you want to set up your Swann NVR security camera on your phone, you’ll first need to find and download the Swann Security App from either the App Store (for iOS devices) or the Google Play Store (for Android devices). The Swann Security App is specifically designed for Swann’s range of security cameras and will allow you to easily access and control your NVR camera system from your phone.
To find the Swann Security App, follow these steps:
For iOS devices (iPhone or iPad):
- Unlock your device and open the App Store.
- Tap on the search icon located at the bottom right corner of the screen.
- Type “Swann Security” in the search bar and press enter.
- Look for the official Swann Security App in the search results.
- Tap on the app and then tap on the “Get” button to start downloading the app.
- Once the app is downloaded, you can open it and follow the on-screen instructions to set up your Swann NVR security camera system.
For Android devices:
- Unlock your device and open the Google Play Store.
- Tap on the search bar located at the top of the screen.
- Type “Swann Security” in the search bar and press enter.
- Look for the official Swann Security App in the search results.
- Tap on the app and then tap on the “Install” button to start downloading the app.
- Once the app is downloaded, you can open it and follow the on-screen instructions to set up your Swann NVR security camera system.
Make sure to grant any necessary permissions to the app and connect your phone to your NVR system’s network for a seamless setup process. Once the setup is complete, you’ll be able to monitor and control your Swann security cameras right from your phone using the Swann Security App.
Note: The Swann Security App may vary depending on the specific model of your Swann NVR security camera system. It’s recommended to check the official Swann website for any specific instructions or compatibility requirements.
Create a Swann Account
In order to set up your Swann NVR security camera on your phone, you will need to create a Swann account. This account will allow you to access your camera feed and settings remotely from your phone.
To create a Swann account, follow these steps:
Step 1: Download the Swann app
First, download the Swann app on your phone. You can find the app on the App Store (for iOS devices) or Google Play Store (for Android devices). Simply search for “Swann” and click on the download button.
Step 2: Open the Swann app
After downloading the app, open it on your phone. You will be prompted to create an account or log in if you already have one.
If you already have a Swann account, simply enter your login credentials and proceed to the next step. If you don’t have an account, continue to the next step.
Step 3: Create a Swann account
To create a new Swann account, click on the “Create Account” button on the app’s login screen. You will be asked to provide some basic information such as your email address and a password.
Make sure to choose a strong password that includes a combination of letters, numbers, and special characters to ensure the security of your account.
After entering your information, click on the “Create Account” button to complete the account creation process.
You will receive a verification email to the email address you provided. Open the email and click on the verification link to activate your Swann account.
Once your Swann account is activated, you can log in to the app using your email address and password.
Now that you have created a Swann account, you can proceed to the next step of setting up your Swann NVR security camera on your phone.
Sign up and create a Swann Account on the app
To set up your Swann NVR security camera on your phone, you will need to sign up and create a Swann Account on the app. Follow the steps below to get started:
- Download and install the Swann app from the App Store (for iOS) or Google Play Store (for Android).
- Open the app and click on the “Sign Up” button.
- Enter your email address and create a password for your Swann Account.
- Click on the “Sign Up” button to complete the registration process.
- Check your email inbox for a verification email from Swann. Open the email and click on the verification link to confirm your account.
- Once your account is verified, open the Swann app and click on the “Sign In” button.
- Enter your registered email address and password, then click on the “Sign In” button.
- After signing in, you will be prompted to add your Swann NVR security camera to your account. Follow the on-screen instructions to complete the setup process.
By signing up and creating a Swann Account on the app, you will be able to access and control your Swann NVR security camera from your phone, receive motion alerts, and view live or recorded video footage anytime, anywhere.
Connect Swann NVR to Your Network
Setting up your Swann NVR security camera system to your phone involves connecting the NVR to your home network. Follow these steps to ensure a successful connection:
1. Connect Ethernet Cable
Start by connecting an Ethernet cable from the back of your NVR to your home router or switch. This connection will allow the NVR to communicate with other devices on your network.
2. Configure IP Settings
To ensure that your NVR and phone can communicate, you need to configure the IP settings on your NVR. Access the NVR’s settings menu through the connected monitor and navigate to the IP configuration section. Set the IP mode to “Static” and manually enter an IP address, subnet mask, gateway, and DNS server that are compatible with your network. Save the settings.
3. Enable DDNS
To access the NVR remotely using your phone, you need to enable Dynamic DNS (DDNS) on your NVR. DDNS allows you to assign a fixed domain name to your NVR’s IP address, even if your IP address changes. In the network settings of your NVR, enable DDNS and choose a service provider. Create an account with the chosen provider and follow the instructions to link your NVR to the DDNS service.
4. Port Forwarding
Port forwarding is necessary if you want to access your NVR remotely from the internet. Access your router’s settings menu and locate the port forwarding section. Add a new rule to forward the desired ports (typically 80 and 8000) to your NVR’s internal IP address. Save the settings.
5. Download Swann App
On your phone, download and install the Swann Security app from the App Store or Google Play Store. Open the app and create an account if you don’t have one already.
6. Add Device to Swann App
In the Swann app, tap on the “+” button to add a new device. Choose “Scan Device QR Code” and position your phone’s camera in front of the QR code displayed on the NVR’s menu. Wait for the app to automatically detect the device and add it to your account.
7. Access NVR on Your Phone
Once the NVR is added to your app, you can access it remotely by selecting its icon from the app’s home screen. You can view live video feeds, playback recorded footage, and manage settings right from your phone.
| Term | Definition |
|---|---|
| NVR | Network Video Recorder; a device that records and stores security camera footage on a network |
| IP Address | A unique numeric identifier assigned to each device on a network |
| Subnet Mask | A set of four numbers used to divide IP addresses into network and host portions |
| Gateway | The IP address of a device that connects a local network to another network |
| DNS Server | A server that translates domain names (e.g., www.example.com) into IP addresses |
| Dynamic DNS (DDNS) | A service that allows you to assign a fixed domain name to a dynamic IP address |
| Port Forwarding | A technique that allows external devices to access a device on a private network |
Connect Swann NVR to Wi-Fi or Ethernet
Setting up your Swann NVR security camera system to connect to your phone requires a stable internet connection. You can choose to connect your NVR to Wi-Fi or through an Ethernet cable.
1. Connect to Wi-Fi:
To connect your Swann NVR to Wi-Fi, follow these steps:
a. Go to the NVR’s menu:
Using the remote control, navigate through the NVR’s menu and find the network settings.
b. Select Wi-Fi:
Select the Wi-Fi option and choose your network from the available list.
c. Enter Wi-Fi password:
Enter your Wi-Fi password using the on-screen keyboard. Make sure to type it correctly.
d. Confirm connection:
After entering the password, confirm the connection and wait for the NVR to connect to your Wi-Fi network.
2. Connect with Ethernet cable:
If you prefer a wired connection, follow these steps:
a. Connect Ethernet cable:
Plug one end of the Ethernet cable into the NVR’s Ethernet port and the other end into your router or modem.
b. Check connection:
Ensure that the cable is securely connected. The NVR should automatically detect the Ethernet connection.
c. Configure network settings:
If the NVR does not connect automatically, access the network settings in the NVR’s menu and configure the IP address and other network settings manually.
d. Verify connection:
Once the NVR is connected to the network, you can verify the connection by checking the network status in the NVR’s menu.
By following these steps, you can connect your Swann NVR security camera system to Wi-Fi or Ethernet, enabling you to access the system remotely using your phone or other mobile devices.
Add Cameras to Swann NVR
Setting up your Swann NVR security camera system is easy, and once you’ve done it, you’ll be able to monitor your property from your phone. Here’s a step-by-step guide on how to add cameras to your Swann NVR:
Step 1: Power on the NVR
Make sure your NVR is properly connected to a power source and turned on. Wait for it to fully boot up.
Step 2: Connect the Cameras
Using the provided cables, connect your cameras to the NVR. Plug one end of the cable into the camera and the other into the corresponding port on the back of the NVR.
Step 3: Configure Camera Settings
Access the NVR’s menu using a monitor or TV connected to the NVR using the HDMI or VGA port. Navigate to the camera settings menu and configure the necessary settings for each camera, such as motion detection, recording schedule, and resolution.
Step 4: Connect the NVR to the Internet
Connect your NVR to your home router using an Ethernet cable. This will allow you to remotely access your cameras using your phone.
Step 5: Install the SwannView Link App
On your smartphone, go to the App Store or Google Play Store and search for the SwannView Link app. Download and install it on your phone.
Step 6: Add Cameras to the App
Open the SwannView Link app and tap on the “+” symbol to add a new camera. Follow the on-screen instructions to scan the QR code on the NVR or manually enter the camera’s details (such as IP address and port number) to add it to the app.
Step 7: Enjoy Remote Viewing
Your cameras are now added to the SwannView Link app. You can use the app to remotely view live feeds, playback recorded footage, and receive push notifications for any motion detected by the cameras.
By following these simple steps, you can easily add your Swann NVR cameras to your phone and enjoy the convenience of remote monitoring.
Connect and register cameras to Swann NVR
Before you can start viewing your Swann security cameras on your phone, you need to connect and register them to your Swann NVR (Network Video Recorder). Follow these steps to set up your cameras:
Step 1: Connect your cameras to the NVR
- Locate the camera inputs on the back of your NVR.
- Using the provided camera cables, connect each camera to the corresponding input on the NVR.
- Ensure that all connections are secure.
Step 2: Power on your cameras and NVR
Connect the power adapters to your cameras and NVR, and then plug them into a power outlet. Make sure that all devices are receiving power.
Step 3: Connect the NVR to your LAN
- Using an Ethernet cable, connect the LAN port on the NVR to your router or modem.
- Ensure that the NVR is connected to your local network.
Step 4: Access the NVR interface
On your phone, open a web browser and enter the IP address of your NVR. You can find the IP address in the NVR settings or on the device itself. Press Enter to access the NVR interface.
Step 5: Register your cameras
Once you are in the NVR interface, navigate to the camera registration section. This may vary depending on the NVR model you have.
- Select the camera you want to register.
- Follow the on-screen instructions to complete the camera registration process.
Repeat this step for each camera you have connected to the NVR.
Once all your cameras are registered, you can proceed to set up remote viewing on your phone or any device using the Swann app.
Enable Remote Access
To access your Swann NVR security camera from your phone, you need to enable remote access. Follow the steps below to set up remote access:
- Ensure that your Swann NVR is connected to your home network and has access to the internet.
- Launch the Swann NVR app on your phone and log in using your credentials.
- Once logged in, go to the settings menu, usually represented by a gear icon.
- Look for the “Remote Access” or “Network” section in the settings menu.
- Enable the remote access option by toggling the switch or selecting the corresponding checkbox.
- Enter the necessary details, such as your email address or Swann account information, to register your NVR with the Swann server.
- Save the settings and let the NVR connect to the Swann server.
- After the NVR is successfully registered, you should see a notification or indication of remote access being enabled.
- Exit the settings menu and go to the live view or playback section to see your security camera footage.
With remote access enabled, you can now view your Swann NVR security camera from your phone, no matter where you are. Make sure you have a stable internet connection on both your NVR and your phone to ensure smooth access.
Remember to set up strong and unique credentials for your Swann NVR and avoid sharing them with others to maintain the security of your surveillance system.
FAQ,
Which app do I need to install on my phone to connect my Swann NVR security camera?
You will need to install the SwannView Link app on your phone to connect your Swann NVR security camera. This app is available for download from the App Store for iOS devices and the Google Play Store for Android devices. Simply search for “SwannView Link” in the respective app store, download and install it on your phone.
Do I need to have Wi-Fi to connect my Swann NVR security camera to my phone?
Yes, you will need Wi-Fi to connect your Swann NVR security camera to your phone. Both your NVR security camera and your phone need to be connected to the same Wi-Fi network in order for them to communicate and for you to be able to view the camera’s live feed on your phone via the SwannView Link app.
Can I connect multiple Swann NVR security cameras to my phone?
Yes, you can connect multiple Swann NVR security cameras to your phone. After installing the SwannView Link app on your phone and connecting it to your NVR system following the setup process, you can add additional cameras to the app by tapping on the “+” icon and selecting the option to add an NVR security camera. You will need to enter the username and password for each camera’s NVR system and the app will list all available cameras for you to connect.
What if I forget the username and password for my Swann NVR security camera’s NVR system?
If you forget the username and password for your Swann NVR security camera’s NVR system, you may need to reset the NVR system to its factory settings. This will erase all settings and configurations, including the username and password. Refer to the user manual or contact Swann’s customer support for instructions on how to perform a factory reset on your specific model of NVR system. Once the NVR system is reset, you can set up a new username and password.
