If you’ve noticed that the front camera on your iPhone 11 is displaying a mirrored image, don’t worry, you’re not alone. Many iPhone 11 users have experienced this issue, and luckily, there is a simple solution to fix it. In this article, we will guide you through the steps to change the front camera mirror setting on your iPhone 11.
Step 1: Open the Settings App
First, you need to open the Settings app on your iPhone 11. You can find the Settings app on your home screen. It looks like a grey icon with gears.
Step 2: Scroll Down and Tap on Camera
Once you have opened the Settings app, scroll down until you find the “Camera” option. Tap on it to access the camera settings.
Step 3: Toggle Off the “Mirror Front Camera” Option
In the camera settings, you will see a toggle switch next to the “Mirror Front Camera” option. By default, this option is turned on, which is why your front camera is displaying a mirrored image. Simply tap on the switch to toggle it off.
Note: Turning off the “Mirror Front Camera” option will display your selfies in the original orientation, just how they appear to others when they view them.
Step 4: Exit the Settings App
After you have successfully turned off the “Mirror Front Camera” option, you can exit the Settings app by pressing the home button or swiping up from the bottom of the screen, depending on your iPhone 11 model.
That’s it! You have successfully changed the front camera mirror setting on your iPhone 11. Now, when you take selfies, they will no longer appear mirrored. Enjoy capturing perfect selfies on your iPhone 11!
Step-by-Step Guide
Changing the front camera mirror in your iPhone 11 can be done easily with just a few simple steps. Follow the guide below to replace the mirror and have your front camera working perfectly again.
What You’ll Need:
- A replacement front camera mirror
- A small Phillips-head screwdriver
- A plastic opening tool
- Tweezers
Step 1: Prepare the iPhone
Before starting the repair process, ensure that your iPhone is turned off. This will prevent any accidental damage while handling the hardware components.
Step 2: Remove the Display Assembly
Use the small Phillips-head screwdriver to remove the two screws located at the bottom of the iPhone. Gently slide the display assembly upwards to detach it from the device.
Step 3: Remove the Broken Mirror
Locate the front camera module on the top of the display assembly. Carefully disconnect the flex cable and remove any adhesive securing the mirror. Use the plastic opening tool to gently pry off the old mirror.
Step 4: Install the New Mirror
Take the replacement mirror and position it correctly in the front camera module. Ensure that it is firmly in place and secure it with the adhesive.
Step 5: Reassemble the iPhone
Reconnect the flex cable of the front camera module and carefully slide the display assembly back into place. Replace the two screws at the bottom of the iPhone to secure the display assembly.
Step 6: Test the Front Camera
Turn on your iPhone and open the camera app to test the front camera. Check if the mirror replacement has resolved any issues with the camera’s functionality.
Note: If you are unsure about performing this repair yourself, it is recommended to seek professional assistance from an authorized service center or contact Apple support for further guidance.
Required Tools
Before you begin changing the front camera mirror on your iPhone 11, it’s important to gather the necessary tools. Here are the items you will need:
Screwdriver Set
A screwdriver set is essential for opening the iPhone’s casing and accessing the front camera mirror. Make sure to have a set that includes the necessary screwdriver heads for iPhone repairs.
Precision Tweezers
Precision tweezers are useful for handling small components and delicate parts during the repair process. They allow for better control and precision when working with the front camera mirror.
Plastic Opening Tools
Plastic opening tools are designed to help separate the different components of the iPhone without causing damage. These tools are essential for safely removing the display assembly and accessing the front camera mirror.
Suction Cup
A suction cup is necessary for lifting the front panel of the iPhone and removing it. It creates a vacuum seal that allows for easy and safe removal of the display assembly without causing any damage.
Replacement Front Camera Mirror
Make sure to have a replacement front camera mirror that is compatible with the iPhone 11. It’s essential to use a high-quality and original replacement part to ensure proper functionality and compatibility.
Having these tools ready before you begin the repair process will help you complete the repair smoothly and efficiently. Remember to exercise caution and take your time when working with delicate iPhone components.
Disconnect Front Panel
Before you can change the front camera mirror on your iPhone 11, you will need to disconnect the front panel. Follow these steps to proceed:
Step 1: Power Off
First, make sure to power off your iPhone 11 completely before starting the disassembly process. This will help prevent any accidental damage.
Step 2: Gather the Required Tools
Before you can disconnect the front panel, gather the necessary tools such as a pentalobe screwdriver, suction cup, spudger, and tweezers. These tools will help you safely remove the components without causing any harm.
Step 3: Remove the Display
Start by removing the two pentalobe screws located at the bottom of the iPhone 11. Use the suction cup to lift the display slightly and insert the spudger in the gap. Gently pry the display up to loosen it from the adhesive.
Be careful not to apply excessive force to prevent damage to the display or any other components.
Step 4: Disconnect the Front Panel Cables
Once the display is partially lifted, use the tweezers or spudger to disconnect the front panel cables. There will be three cables – display, digitizer, and front camera flex cables. Carefully lift the connectors to unplug them from their respective sockets on the logic board.
Take your time and be gentle while disconnecting the cables to avoid causing any damage.
Step 5: Remove the Display Assembly
After disconnecting the front panel cables, you can fully remove the display assembly from the iPhone 11. Gently lift it away from the device, taking care not to strain or damage the flex cables.
Proceed with caution and ensure all necessary cables are safely disconnected and out of the way before continuing with the front camera mirror replacement process.
By following these steps, you should now have successfully disconnected the front panel of your iPhone 11. You are now ready to proceed with changing the front camera mirror.
Remove Battery
Before attempting to change the front camera mirror on your iPhone 11, it is important to remove the battery to prevent any electrical shock or damage.
Here are the steps to safely remove the battery:
- Power off your iPhone 11 by pressing and holding the side button and either volume button simultaneously. Slide the power off slider from left to right.
- Prepare a pentalobe screwdriver and a suction cup for the next steps.
- Use the pentalobe screwdriver to remove the two screws at the bottom of the iPhone 11, on either side of the charging port.
- Place the suction cup on the screen, just above the home button, and then gently pull the suction cup upwards to lift the screen slightly.
- Insert a plastic prying tool between the screen and the rear case, starting from the bottom edge, and carefully move it along the sides to separate the adhesive holding the screen.
- Lift the screen assembly from the rear case by swinging it up from the bottom and then towards the top, making sure not to damage any of the cables connecting the screen to the logic board.
- Locate the battery connector and use a spudger or a plastic opening tool to gently disconnect the battery connector from the logic board.
- Wait for at least five minutes to allow the adhesive holding the battery to weaken.
- Use a pull tab or a plastic opening tool to gently pull the adhesive tabs attached to the battery, ensuring not to bend or puncture the battery.
- Slowly lift the battery from its original position, again being careful not to damage it or puncture it.
After successfully removing the battery, you can proceed with changing the front camera mirror on your iPhone 11. Remember to follow the appropriate steps and exercise caution to avoid any further damage to your device.
Remove Display Assembly
To change the front camera mirror in iPhone 11, you will need to remove the display assembly. Follow these steps to do so:
- Power off the iPhone and disconnect any cables or accessories connected to it.
- Locate the pentalobe screws at the bottom of the iPhone near the charging port.
- Use a pentalobe screwdriver to remove the screws.
- Apply gentle upward pressure on the bottom of the iPhone to separate the display assembly from the rear case. Slowly lift the display assembly to about a 90-degree angle.
- Slide an opening pick or a plastic card under the display assembly, starting from the bottom edge. Gently work your way around the sides of the iPhone to loosen the adhesive holding the display assembly.
- Be careful not to insert the opening pick too far or apply too much pressure, as this may damage the display assembly or other internal components.
- Once the adhesive is loosened, carefully lift the display assembly and hold it at an angle against the rear case.
- Locate the cables connecting the display assembly to the iPhone’s logic board.
- Use a plastic spudger or tweezers to disconnect the display assembly cables by gently prying upwards.
- With the cables disconnected, you can fully remove the display assembly from the iPhone.
Now that the display assembly is removed, you can proceed with replacing the front camera mirror in your iPhone 11.
Unscrew Front Camera Mirror
If you need to change the front camera mirror on your iPhone 11, you will first need to unscrew it. This process requires careful attention and precision to avoid damaging any components of your device.
Tools Required:
Before you begin, gather the following tools:
- Phillips screwdriver
- Plastic opening tool
- Tweezers
Step-by-step Instructions:
- Begin by powering off your iPhone 11 and disconnecting any cables.
- Remove the two pentalobe screws located at the bottom of your iPhone, near the Lightning port.
- Use the plastic opening tool to gently separate the display assembly from the rear case.
- Continue to carefully lift the display assembly, but only open it at a 90-degree angle to avoid damaging the cables.
- Locate the front camera module, which is located at the top of the display assembly.
- Using the Phillips screwdriver, remove the screws that secure the front camera mirror in place.
- Once the screws are removed, carefully lift the front camera mirror away from the display assembly.
- Inspect the new front camera mirror and ensure it is free from any dust or debris.
- Place the new front camera mirror into position and secure it with the screws you removed earlier.
- Gently lower the display assembly back into place, making sure to reconnect any cables.
- Secure the display assembly by reinstalling the two pentalobe screws at the bottom of your iPhone.
- Finally, power on your iPhone 11 to ensure the front camera mirror is functioning correctly.
It is important to note that this process should be done with caution. If you are unsure about any of the steps or feel uncomfortable, it is recommended to seek professional assistance or take your iPhone to an authorized service center.
| Warning: |
|---|
| Performing any repairs on your iPhone by yourself may void your warranty. Always exercise caution and follow proper procedures. |
Replace Front Camera Mirror
If the front camera mirror on your iPhone 11 is cracked or damaged, you may need to replace it to ensure the proper functioning of the camera. Here are the steps to replace the front camera mirror.
What You Will Need
Before you begin, make sure you have the following tools:
-
Replacement front camera mirror: You can purchase a replacement front camera mirror online or from an authorized Apple service provider.
-
Small Phillips screwdriver: This will be needed to remove the screws holding the front camera module in place.
-
Prying tool: You will use this tool to carefully pry open the front panel of your iPhone.
-
Tweezers: Tweezers can be handy for handling small screws and other delicate parts.
Step-by-Step Instructions
Follow these steps to replace the front camera mirror of your iPhone 11:
-
Power off your iPhone: Before beginning any repairs, always turn off your device to avoid any potential damage.
-
Remove the front panel: Use a prying tool, such as a plastic opening tool, to gently pry open the front panel of your iPhone. Start from the bottom edge and carefully work your way around the edges until the front panel is loose.
-
Remove the screws: Locate the screws that secure the front camera module in place. Use a small Phillips screwdriver to remove the screws and set them aside.
-
Detach the front camera module: Carefully lift the front camera module from its position and disconnect its connector from the logic board using a prying tool.
-
Replace the front camera mirror: Remove the damaged front camera mirror and replace it with the new one. Ensure that it is properly aligned and securely attached.
-
Reassemble your iPhone: Reverse the above steps to reassemble your iPhone. Make sure all screws are tightened properly and the front panel is securely in place.
-
Test the front camera: Power on your iPhone and test the front camera to ensure it is functioning correctly.
If you encounter any difficulties during the process or are unsure about completing the repair yourself, it is recommended to seek professional assistance from an authorized Apple service provider.
Reassemble iPhone 11
After replacing the front camera mirror in your iPhone 11, it’s time to reassemble the device. Reassembling involves carefully putting all the components back together in the reverse order of disassembly.
1. Take the display assembly and position it above the iPhone body. Carefully align the connectors on the display assembly with the corresponding connectors on the iPhone.
2. Gently lower the display assembly onto the iPhone body, making sure it is properly aligned. Press down on the edges of the display assembly to secure it in place.
3. Reinsert the screws that hold the display assembly in place using the correct screwdriver. Make sure to tighten the screws evenly to avoid any damage to the threads.
4. Connect the front camera ribbon cable to its connector on the display assembly. It should click into place securely.
5. Carefully reattach any other cables or connectors that were disconnected during the disassembly process, ensuring that they are properly aligned and firmly connected.
6. Place the battery back into its compartment and reconnect the battery connector. Make sure it is properly seated and secure.
7. Replace the Taptic Engine and secure it with the necessary screws.
8. Finally, carefully put the rear cover back on the iPhone, pressing it down until it clicks into place. Make sure all edges are flush and there are no gaps.
Once reassembled, turn on your iPhone 11 and test the front camera mirror to ensure it is working properly. If everything looks good, congratulations on successfully reassembling your iPhone 11!
Question-answer:
Can I change the front camera mirror in my iPhone 11?
Yes, it is possible to change the front camera mirror in your iPhone 11. However, this process requires some technical skills and specific tools. It is recommended to take your iPhone to an authorised service centre or a professional technician to ensure the replacement is done correctly.
Why would I need to change the front camera mirror in my iPhone 11?
There could be several reasons why you might need to change the front camera mirror in your iPhone 11. It could be due to physical damage, such as cracks or scratches on the mirror, which can affect the quality of your selfies. Additionally, if the mirror becomes loose or misaligned, it can cause issues with the front camera’s autofocus or calibration.
What tools do I need to change the front camera mirror in my iPhone 11?
To change the front camera mirror in your iPhone 11, you will need a pentalobe screwdriver, a small Phillips screwdriver, a nylon spudger, a suction cup, tweezers, and a replacement front camera mirror. These tools will help you remove the necessary screws, pry open the iPhone, and carefully replace the mirror without causing any damage.
Can I change the front camera mirror in my iPhone 11 myself?
While it is possible to change the front camera mirror in your iPhone 11 yourself, it is not recommended unless you have experience with iPhone repairs. The process involves dismantling the phone and can be quite intricate. If you make a mistake or mishandle any components, it can cause further damage to your device. It is best to seek professional assistance or take your iPhone to an authorised service centre.
How much does it cost to change the front camera mirror in an iPhone 11?
The cost of changing the front camera mirror in an iPhone 11 can vary depending on where you take it for repairs. If you opt for an authorised Apple service centre, the cost may be higher compared to third-party repair shops. On average, you can expect to pay around £50-£100 for the replacement, including the cost of the mirror and labour.
