The Arlo security camera is a popular choice for people looking to enhance their home security. One of the key advantages of the Arlo camera is its versatility – it can be easily mounted on a variety of surfaces, including brick. Mounting your Arlo camera on brick requires careful planning and the right tools, but with a little bit of effort, you can have your camera up and running in no time.
Before you start the mounting process, it’s important to gather all the necessary tools and equipment. You’ll need a drill with a masonry bit, screws, anchors, a level, and a pencil. It’s also a good idea to have a helper to assist you with the installation.
Begin by deciding on the best location for your Arlo camera. Choose a spot that provides a clear view of the area you want to monitor, while also being inconspicuous. Use the level and pencil to mark the positions for the holes where you will mount the camera.
Next, drill the holes using the masonry bit. Make sure you drill deep enough to accommodate the anchors. Once the holes are drilled, insert the anchors to provide a secure base for the screws. Then, with the help of your assistant, hold the camera against the wall and align it with the drilled holes. Finally, attach the camera using the screws and adjust it to the desired angle.
Mounting your Arlo security camera on brick can be a simple and straightforward process if you follow these steps carefully. Remember to test the camera after installation to ensure that it is working properly and capturing the footage you need to keep your home safe and secure.
Choosing a Suitable Location for Arlo Camera on Brick
Mounting your Arlo security camera on a brick wall can provide optimum coverage and protection for your property. However, it is crucial to choose a suitable location that ensures clear visibility and captures all essential areas. Here are some factors to consider when selecting the perfect spot for your Arlo camera:
1. Height: Position the camera at a height that allows a wide field of view and prevents easy tampering.
2. Angle: Mount the camera at an angle that captures the desired area of surveillance. Adjust the tilt to avoid obstructions or glare from direct sunlight.
3. Accessibility: Make sure the camera is easily accessible for installation, maintenance, and battery replacement.
4. Protection from the elements: Ensure that the camera’s housing and cable connections are adequately protected from rain, heat, and other environmental factors.
5. Light conditions: Take note of the lighting conditions in the area, especially during the day and night, to ensure optimal video quality.
6. Wi-Fi signal strength: Ensure that the camera’s location has a strong Wi-Fi signal to guarantee uninterrupted connectivity.
7. Obstructions: Avoid mounting the camera near objects that can obstruct the view, such as trees, shrubs, or walls.
8. Additional accessories: Consider using additional mounting accessories, such as brackets or mounts, to achieve the desired positioning and stability.
By considering these factors, you can select an ideal location for your Arlo security camera on your brick wall. Following this guideline will help ensure optimal performance and surveillance for your property.
Gathering Necessary Tools and Materials
Before you start mounting your Arlo security camera on a brick wall, it’s important to gather all the necessary tools and materials. This will ensure that the installation process goes smoothly and you have everything you need on hand.
Tools:
- Power drill
- Masonry drill bit
- Tape measure
- Pencil or marker
- Screwdriver
- Level
Materials:
- Arlo security camera
- Mounting bracket
- Mounting screws
- Anchors
- Wall plugs
- Extension cables (if needed)
Make sure to check if the package of your Arlo security camera includes all the necessary tools and materials. Additionally, if you need any extra cables or accessories to extend the reach of your camera, make sure to purchase them before starting the installation process.
Preparing the Brick Surface for Mounting
Before mounting your Arlo security camera on a brick surface, you will need to properly prepare the area to ensure a secure and stable installation. Follow the steps below to prepare the brick surface:
- Clean the brick: Start by cleaning the brick surface where you plan to mount the camera. Use a mild detergent and water to remove any dirt, debris, or loose particles from the surface. Scrub gently with a soft-bristle brush or sponge.
- Let it dry: After cleaning, allow the brick surface to dry completely. This may take a few hours or even overnight, depending on the humidity in your area. Make sure the surface is completely dry before proceeding.
- Inspect the brick: Inspect the brick for any cracks, crumbling, or loose sections. If you notice any damage, it is recommended to repair or replace the damaged bricks before mounting the camera. This will ensure a solid and secure mount.
- Measure and mark: Use a tape measure to determine the exact location where you want to mount the camera. Mark the spots on the brick surface using a pencil or marker. Double-check the measurements and ensure the marks are level.
- Gather the necessary tools: Before attaching the camera bracket to the brick, make sure you have all the necessary tools on hand. This may include a drill, masonry drill bits, screws, a screwdriver, and wall anchors, depending on the mounting hardware provided with your camera.
By properly preparing the brick surface, you will create a strong foundation for mounting your Arlo security camera and ensure the longevity of the installation.
Installing the Mounting Bracket on Brick
Mounting your Arlo security camera on brick requires the use of a mounting bracket specifically designed for brick surfaces. Follow these steps to properly install the mounting bracket on brick:
- Start by selecting the location on the brick surface where you want to mount your Arlo camera. Ensure that the chosen spot provides a clear view of the area you want to monitor.
- Using a pencil or marker, mark the drill holes for the mounting bracket on the brick surface. Make sure the marks are level and evenly spaced.
- Put on safety glasses and gloves to protect yourself during the installation process.
- Using a masonry drill bit, carefully drill pilot holes into the marked spots on the brick. Make sure to use the appropriate drill size recommended by the mounting bracket manufacturer.
- Once the pilot holes are drilled, insert plastic anchors into each hole. Gently tap the anchors with a hammer until they are flush with the brick surface.
- Align the mounting bracket with the pilot holes and insert the screws provided with the bracket through the holes in the bracket and into the anchors in the brick.
- Tighten the screws with a screwdriver or power drill, being careful not to overtighten and damage the brick surface.
- Ensure that the mounting bracket is securely attached to the brick and does not wobble or move when pressure is applied.
Once the mounting bracket is properly installed on the brick surface, you can easily attach your Arlo security camera to the bracket and adjust its positioning as needed. Make sure to follow the manufacturer’s instructions for attaching the camera to the bracket to ensure a secure and stable installation.
Attaching the Arlo Security Camera to the Mounting Bracket
Once you have chosen a suitable location for your Arlo security camera on brick, you can proceed with attaching it to the mounting bracket. Follow these steps:
- Prepare the camera:
- Align the camera:
- Secure the camera:
- Adjust the angle:
- Test the camera:
Ensure that your Arlo security camera is turned off before proceeding. This will prevent any accidental damage.
Place the camera on the bracket so that the slots on the back of the camera line up with the tabs on the bracket. The camera should be facing the desired direction.
Once the camera is properly aligned, use the provided screws to attach it to the mounting bracket. Insert the screws through the slots on the back of the camera and tighten them snugly.
Note: Be careful not to over-tighten the screws, as this may damage the camera or bracket.
If necessary, adjust the angle of the camera to achieve the desired field of view. This can be done by loosening the adjustment screws on the bracket and repositioning the camera accordingly.
After attaching the camera to the mounting bracket, turn it on and ensure that it is functioning properly. Test the camera’s live feed and make any necessary adjustments to the angle or position.
Following these steps will help you securely attach your Arlo security camera to the mounting bracket on a brick surface, ensuring optimal functionality and surveillance coverage.
Testing the Mounting Stability and Adjusting Camera Angle
Once you have mounted your Arlo security camera on a brick wall, it is important to test its stability and adjust the camera angle for optimal surveillance coverage. Here are the steps to follow:
1. Stability Testing
- Ensure that the camera mount is securely attached to the brick wall by checking all the screws and bolts.
- Gently shake the camera mount to assess its stability. If there is significant movement or looseness, consider tightening the screws or bolts further.
- If the camera mount still has excessive movement or feels unstable, you may need to reassess the mounting location or consult with a professional for further assistance.
2. Adjusting Camera Angle
- Access the camera’s live feed on your Arlo app or through the web portal.
- Observe the camera’s field of view and identify any blind spots or areas that require better coverage.
- Loosen the camera’s locking mechanism or adjust the ball socket joint to change the camera angle.
- Move the camera to the desired angle and then tighten the locking mechanism or ball socket joint to secure it in place.
- Verify the camera’s new angle by checking the live feed and ensure that it provides the desired surveillance coverage.
By testing the mounting stability and adjusting the camera angle, you can ensure that your Arlo security camera effectively monitors the intended area and provides maximum security for your property.
FAQ,
What is the best way to mount an Arlo security camera on brick?
The best way to mount an Arlo security camera on brick is to use a drill and masonry anchors. Start by marking the spot where you want to mount the camera on the brick wall. Then, drill holes into the brick using a masonry bit. Insert masonry anchors into the holes and secure them by tapping them gently with a hammer. Finally, use the screws provided with the Arlo camera to attach the camera mount to the anchors.
Can I mount an Arlo security camera on brick without drilling?
Yes, you can mount an Arlo security camera on brick without drilling by using outdoor adhesive hooks or adhesive strips specifically designed for outdoor use. Clean the surface of the brick wall where you want to mount the camera, then attach the adhesive hook or strip to the wall following the manufacturer’s instructions. Make sure to choose a hook or strip that can support the weight of the camera. Once the adhesive has set, you can attach the camera to the hook or strip according to the Arlo camera’s mounting instructions.
Are there any alternative methods for mounting an Arlo security camera on brick?
Yes, there are alternative methods for mounting an Arlo security camera on brick. Some other options include using a brick clamp or a brick clamp with adhesive strips. A brick clamp is a metal bracket that can be attached to the brick wall using screws or adhesive, depending on the specific clamp. This provides a sturdy base for mounting the Arlo camera. Alternatively, you can use a brick clamp with adhesive strips that eliminate the need for drilling or screwing into the brick. However, make sure to choose a method that is suitable for the weight and size of your Arlo camera.
