How to update your gopro hero 4 camera

Keeping your GoPro Hero 4 camera up to date is essential to ensure that you are getting the most out of your device. Updating your camera’s firmware will not only improve its performance but also provide you with access to the latest features and bug fixes.

To update your GoPro Hero 4 camera, follow these simple steps:

Step 1: Check for Updates

Before you begin the update process, make sure that you have the latest version of the GoPro App installed on your smartphone or tablet. This will allow you to connect your camera to your device and download the necessary updates. Open the GoPro App and navigate to the “Devices” tab. If there is an update available for your camera, you will see a notification here.

Step 2: Connect Your Camera

Connect your GoPro Hero 4 camera to your smartphone or tablet using the provided USB cable. Make sure that your camera is turned on and in Wi-Fi mode. Open the GoPro App and tap on the “Connect & Control” button. Follow the on-screen instructions to establish a connection between your camera and your device.

Step 3: Download and Install the Update

Once you have established a connection, the GoPro App will automatically check for updates for your camera. If an update is available, you will be prompted to download and install it. Follow the on-screen instructions to complete the update process. Make sure that your camera is connected to a stable Wi-Fi network and has sufficient battery life to avoid any interruptions during the update.

Step 4: Verify the Update

After the update has been successfully installed, restart your GoPro Hero 4 camera. To verify that the update was successful, go to the settings menu on your camera and navigate to the “Camera Info” section. Here, you should see the updated firmware version displayed.

By regularly updating your GoPro Hero 4 camera, you can ensure that you are always getting the best performance and features from your device. So don’t miss out on the latest updates and enjoy capturing your adventures with the enhanced capabilities of your GoPro Hero 4 camera!

How to Update Your GoPro Hero 4 Camera

Keeping your GoPro Hero 4 camera up to date with the latest firmware is essential to ensure optimal performance and access to new features. Updating your camera is a simple process that can be done in just a few easy steps.

Step 1: Check the current firmware version

Before updating your GoPro Hero 4 camera, it’s important to check the current firmware version. To do this, follow these steps:

  1. Power on your GoPro Hero 4 camera.
  2. Press the Mode button repeatedly until you see the Settings icon (wrench).
  3. Press the Shutter button to select the Settings menu.
  4. Scroll down and select the “About” option.
  5. In the About menu, you will find the current firmware version displayed on the screen.

Step 2: Download the latest firmware

Once you have identified the current firmware version of your GoPro Hero 4 camera, visit the official GoPro website to download the latest firmware update. Make sure to select the correct firmware version for your specific model and follow the on-screen instructions to download the file onto your computer.

Step 3: Prepare the microSD card

In order to update your GoPro Hero 4 camera, you will need to transfer the firmware update file onto a microSD card. Follow these steps to prepare the microSD card:

  1. Insert the microSD card into your computer’s card reader.
  2. Create a new folder on the microSD card and name it “UPDATE”.
  3. Copy the downloaded firmware update file into the “UPDATE” folder.
  4. Eject the microSD card from your computer.

Step 4: Update your GoPro Hero 4 camera

Once you have prepared the microSD card with the firmware update file, you can proceed to update your GoPro Hero 4 camera. Follow these steps:

  1. Power off your GoPro Hero 4 camera.
  2. Insert the microSD card into the camera’s microSD card slot.
  3. Power on the camera and wait for the update process to begin. This may take a few moments.
  4. Do not power off the camera or remove the microSD card during the update process.
  5. Once the update is complete, the camera will automatically power off.
  6. Remove the microSD card from the camera.
See also  Best gopro camera for cycling

That’s it! You have successfully updated your GoPro Hero 4 camera to the latest firmware version. Now you can enjoy improved performance and take advantage of new features.

Note: It is always a good idea to fully charge your GoPro Hero 4 camera before performing a firmware update to ensure a smooth and uninterrupted process.

Disclaimer: Updating the firmware of your GoPro Hero 4 camera carries some risks. Make sure to carefully read and follow all instructions provided by GoPro. If you are unsure about any step or encounter any issues, it is recommended to seek assistance from a qualified professional.

Understanding the Importance of Regular Updates

Regular updates for your GoPro Hero 4 camera are essential for ensuring optimal performance and taking full advantage of new features and improvements. Here are a few reasons why regular updates are important:

Bug Fixes:

Software updates often come with bug fixes that address issues and glitches discovered in the previous version. By regularly updating your GoPro Hero 4 camera, you can ensure a smoother and more reliable user experience.

New Features:

Updates can introduce new features and functionalities to your GoPro Hero 4 camera that enhance its capabilities. Whether it’s improved video quality, advanced shooting modes, or compatibility with new accessories, updates can unlock exciting possibilities for your camera.

Security Enhancements:

Updating your GoPro Hero 4 camera ensures that any security vulnerabilities are patched, reducing the risk of unauthorized access and protecting your data. This is especially important if you use your camera for capturing sensitive or personal moments.

Optimized Performance:

Updates often include performance enhancements that can improve the overall speed, responsiveness, and efficiency of your GoPro Hero 4 camera. These updates can optimize battery life, reduce lag, and improve the camera’s overall performance, allowing you to capture your adventures seamlessly.

Regularly checking for updates and installing them is a simple yet essential step in maximizing the potential of your GoPro Hero 4 camera. Make sure to regularly visit the official GoPro website or use the GoPro app to keep your camera up to date with the latest firmware and software updates.

Checking Your Current Firmware Version

Before updating your GoPro Hero 4 camera, it is important to check the current firmware version to ensure that you are updating to the latest software. Follow the steps below to check your firmware version:

  1. Power on your GoPro Hero 4 camera.
  2. Press the Mode button on the side of the camera to navigate to the Settings menu.
  3. Use the Shutter button (located on the top of the camera) to select the Settings option.
  4. Scroll through the menu using the Mode button until you find the “About” option.
  5. Select the “About” option by pressing the Shutter button.
  6. Your current firmware version will be displayed on the screen.

Once you have noted down your current firmware version, you can compare it to the latest firmware version available on the GoPro website. If your firmware is outdated, it is recommended to update your camera to the latest firmware version in order to access new features and improvements.

Downloading the Latest Firmware

In order to update your GoPro Hero 4 camera, you will need to download the latest firmware available for your specific model. The firmware is essentially a software package that controls the functionality of your camera and fixes any bugs or issues that may have been identified by the manufacturer.

To download the latest firmware, you will need to visit the official GoPro website and navigate to the support page. Here, you will find a list of available updates for your camera model. Make sure to choose the correct update for your specific camera version.

Once you have selected the appropriate firmware update, click on the download button to initiate the download. Depending on your internet connection speed, the download may take a few minutes. While the firmware is downloading, ensure that your camera is fully charged or connected to a power source to avoid any interruption during the update process.

After the firmware has finished downloading, locate the downloaded file on your computer. The file will typically be in a .zip format and will need to be extracted before it can be installed on your camera. Right-click on the file and select the “Extract” option to unzip the firmware update.

Once the firmware update has been extracted, you will need to transfer it to the SD card that is inserted in your GoPro Hero 4 camera. Connect your camera to your computer using a USB cable and navigate to the folder where the firmware update was extracted. Copy the firmware file and paste it directly onto the root directory of your SD card.

After the firmware file has been successfully transferred to the SD card, safely eject your camera from your computer. Ensure that the camera is turned off before removing the SD card from its slot. Insert the SD card back into your camera and power it on.

To install the firmware update, navigate to the settings menu on your GoPro Hero 4 camera. Locate the “Preferences” or “Camera” settings and select the “Update Firmware” option. Follow the on-screen instructions to initiate the firmware update process.

See also  Will apeman action camera attach to gopro chest strap

Once the update is complete, your GoPro Hero 4 camera will restart automatically. It is important to not turn off the camera or remove the SD card during the update process, as this could potentially damage your camera.

By downloading and installing the latest firmware update, you will ensure that your GoPro Hero 4 camera is equipped with the latest features and fixes available. This will enhance the performance and usability of your camera, providing you with the best experience possible.

Updating Your Camera Using the GoPro App

If you have a GoPro HERO 4 camera, updating the firmware is a crucial step to ensure you have the latest features and performance improvements. One of the easiest ways to update your camera is by using the GoPro App on your smartphone or tablet.

To update your camera using the GoPro App, follow these steps:

Step 1: Connect Your Camera to the GoPro App

  1. Download and install the GoPro App from the App Store or Google Play Store.
  2. Open the app on your smartphone or tablet.
  3. Turn on your camera and go to the Wi-Fi settings. Connect your device to the Wi-Fi network with a name that starts with “GoPro”.
  4. Go back to the GoPro App and follow the on-screen instructions to pair your camera with your device.

Step 2: Check for Updates

Once your camera is connected to the GoPro App, you can easily check for any available updates. Here’s how:

  1. In the GoPro App, tap on the “Camera” icon at the bottom of the screen.
  2. Tap on the “Settings” icon in the top-right corner.
  3. Scroll down and tap on “Camera Info”.
  4. If there is a firmware update available, you will see a prompt to update your camera. Tap on the “Update” button to proceed.

Step 3: Update Your Camera

Once you tap on the “Update” button, the GoPro App will start downloading the firmware update to your device. Make sure your smartphone or tablet is connected to a stable Wi-Fi network and has enough storage space.

Once the firmware update is downloaded, the GoPro App will automatically transfer the update to your camera. This process may take several minutes, so make sure your camera is charged or connected to a power source.

Do not turn off or disconnect your camera during the update process. Once the update is complete, your camera will restart automatically.

Step 4: Verify the Update

After your camera restarts, you should verify that the update was successful. Follow these steps:

  1. Go back to the GoPro App and tap on the “Camera” icon.
  2. Tap on the “Settings” icon in the top-right corner.
  3. Scroll down and tap on “Camera Info”.
  4. Check the firmware version displayed. If it matches the latest firmware version available on the GoPro website, then the update was successful.

That’s it! You have successfully updated your GoPro HERO 4 camera using the GoPro App. Enjoy the latest features and improvements for your camera!

Updating Your Camera Using a Computer

If you prefer to update your GoPro Hero 4 camera using a computer, follow the steps below:

Step 1: Check System Requirements

Before you begin, make sure your computer meets the following system requirements:

  • Operating System: Windows 7 or later, or Mac OS X 10.8 or later
  • Internet Connection: High-speed internet connection
  • USB Port: USB port with a USB cable

Step 2: Download and Install GoPro App

Go to the GoPro website and download the GoPro App for your computer. Follow the on-screen instructions to install the app.

Step 3: Connect Your Camera to the Computer

Connect your GoPro Hero 4 camera to your computer using the USB cable that came with the camera. Ensure the camera is powered on and in standby mode.

Step 4: Launch the GoPro App

Launch the GoPro App on your computer. If you’re using a Windows computer, double-click the GoPro App icon on your desktop. If you’re using a Mac computer, go to your Applications folder and double-click the GoPro App icon.

Step 5: Update Your Camera

Once the GoPro App is launched, follow the on-screen instructions to update your camera. The app will guide you through the process, and you may need to enter the serial number of your camera.

It’s important to note that during the update process, the camera may turn on and off, and you might see the GoPro logo and progress bars on the camera’s LCD screen. This is normal and part of the update process.

Once the update is complete, the camera will restart automatically. You can disconnect the USB cable from the camera and your computer.

Now your GoPro Hero 4 camera is updated and ready to use with the latest features and performance improvements.

If you encounter any issues during the update process, refer to the GoPro support website for troubleshooting steps or contact customer support for further assistance.

Troubleshooting Common Update Issues

Updating your GoPro HERO 4 camera is generally a straightforward process, but sometimes you may encounter some issues. Here are some common problems that you may face while updating your camera firmware and what you can do to solve them:

See also  How to use gopro as streaming camera
Issue Solution
1. Camera not recognizing the update file Ensure that the update file is correctly named and placed in the root directory of your SD card. Double-check that your camera supports the specific update version you are trying to install.
2. Update process interrupted or freezing If the update process freezes or gets interrupted, remove the battery from your camera and insert it back after a few seconds. Restart the update process and make sure all connections are secure.
3. Update unsuccessful or fails to install If the update fails to install, try formatting your SD card and then copy the update file onto it again. Ensure that your camera’s battery is fully charged before starting the update. If the problem persists, contact GoPro customer support for further assistance.
4. Camera not powering on or experiencing other issues after the update If your camera refuses to power on or encounters other problems after the update, perform a manual firmware update. Download the firmware update file from GoPro’s official website and follow the instructions to manually update your camera.

By following these troubleshooting steps, you should be able to resolve most common update issues with your GoPro HERO 4 camera. Remember to always read the instructions provided by GoPro and backup your camera’s content before performing any updates.

Benefits of Updating Your GoPro Hero 4 Camera

Updating your GoPro Hero 4 camera to the latest firmware version can provide a number of benefits and improvements to enhance your shooting experiences. Here are some of the advantages of keeping your camera up to date:

Improved Performance The firmware updates often include optimizations and bug fixes that can enhance the overall performance of your GoPro Hero 4 camera. This can result in smoother operation, better video quality, and improved battery life.
New Features By updating your camera, you can unlock new features and functionalities that may not have been available in previous firmware versions. This can include new shooting modes, improved image stabilization, or enhanced connectivity options.
Better Compatibility Updating your GoPro Hero 4 camera ensures that it remains compatible with the latest accessories, apps, and software updates released by GoPro. This allows you to take advantage of the latest innovations and improvements in the GoPro ecosystem.
Enhanced Security Updating your camera’s firmware can also address any potential security vulnerabilities that may have been discovered since the release of your camera. This helps to ensure that your data and footage are protected while using your GoPro Hero 4.
Optimized Settings Firmware updates often include optimized settings and presets that can help you achieve better results in different shooting scenarios. These improvements can make it easier to capture high-quality photos and videos with your GoPro Hero 4 camera.

Overall, regularly updating your GoPro Hero 4 camera is essential to get the most out of your device. It can provide you with improved performance, new features, better compatibility, enhanced security, and optimized settings, ensuring that your GoPro adventures are captured at their best.

Additional Tips and Recommendations

Here are some additional tips and recommendations to consider when updating your GoPro Hero 4 camera:

1. Backup your data: Before performing any firmware updates, make sure to back up all your important data. This will ensure that if anything goes wrong during the update process, you won’t lose any valuable footage.
2. Check for compatibility: Before updating your camera, check if the new firmware is compatible with your specific GoPro Hero 4 model. GoPro’s official website will have all the information you need regarding firmware compatibility.
3. Charge your battery: Make sure your camera’s battery is fully charged before starting the update process. Updating firmware can take some time, and having a fully charged battery will ensure the process is not interrupted.
4. Stable internet connection: Ensure that you have a stable and strong internet connection before downloading any firmware updates. Slow or interrupted downloads can cause issues during the update process.
5. Follow instructions carefully: Read and follow the instructions provided by GoPro for updating your camera’s firmware. Make sure to follow each step carefully to avoid any errors or complications.
6. Reset camera settings: After updating the firmware, it’s a good idea to reset your camera’s settings to default. This can help avoid any compatibility issues and ensure optimal performance.
7. Test the update: After updating the firmware, test your camera to make sure everything is working properly. Record a short video and review it to ensure there are no issues or glitches.

Question-answer:

Why should I update my GoPro Hero 4 camera?

Updating your GoPro Hero 4 camera ensures that you have the latest firmware and software installed, which can improve the overall performance and functionality of the camera. It may also provide bug fixes, compatibility with new accessories, and access to new features.

How do I update my GoPro Hero 4 camera?

To update your GoPro Hero 4 camera, you will need to have a microSD card and access to a computer. First, visit the GoPro website and download the latest firmware update file for your specific camera model. Then, format the microSD card using the camera’s format option. Next, transfer the firmware update file onto the microSD card. Insert the microSD card into the camera and power it on. The camera should automatically detect the firmware update file and prompt you to update. Follow the on-screen instructions to complete the update.

What are the benefits of updating the firmware on my GoPro Hero 4 camera?

Updating the firmware on your GoPro Hero 4 camera can provide several benefits. It can improve the camera’s overall performance, including faster startup times and improved battery life. The update may also fix any known issues or bugs with the previous firmware version. Additionally, firmware updates often introduce new features or enhance existing ones, giving you access to a wider range of options and capabilities with your camera.

Can I update my GoPro Hero 4 camera using the GoPro mobile app?

No, you cannot update your GoPro Hero 4 camera using the GoPro mobile app. The firmware update process for the Hero 4 camera requires a computer and a microSD card. The mobile app is only used for controlling the camera, viewing and editing footage, and accessing other settings and features of the camera.

John Holguin
John Holguin

Certified travel aficionado. Proud webaholic. Passionate writer. Zombie fanatic.

GoPro Reviews
Logo